Agrovisitor.com

Importance of crop classification During grounding When applying fertilizers To select plants for transplanting To use chemical herbicides For pest control During grounding Land preparation varies according to different crops. Example:-Potato crops require a fairly high soil preparation, while cereals and legumes do not require soil preparation.       2.When applying fertilizers It is easy to apply that fertilizer mixture to crops in the same set.  Examples:-  A single fertilizer mixture can be applied to the gourd crops        3.To pick a crop for planting Transplanting plants of different genera is difficult Grafting between two plants of the same genus is effective The connection between two phenomena of the same specialty is very important        4.When using chemical herbicides In the application of chemical herbicides, the morphological characteristics of the crops are also exploited in addition to their excellent pe...

Irrigation system in Sri Lanka  Among the irrigation systems in the dry zone of Sri Lanka, tank systems are the oldest. In Anuradhapura District, Sri Lanka, there is a lake system of 12 lakes. It has been created in the vicinity of Malwatu Oya and Yan Oya in Palugaswewa area. It is located 175 km inland from the capital Colombo. Anuradhapura is 40 km away, Habarana is 30 km and Dambulla is 10 km. This tank system irrigates 18,000 hectares of subsidized paddy cultivation area. The agro-ecological zone has an annual rainfall between 75 mm and 900 mm. The altitude is between 165 and 175 meters above sea level. In this area, paddy cultivation, vegetable cultivation and gardening are done as grants. The average temperature in this area is between 29 and 35 degrees Celsius. The Sinhalese, Tamil and Muslim people live in the vicinity of this lake system and the other crops grown are paddy, onion, chillies, cucumber, sesame, cow's milk, vegetables, fruits, etc. and they also cultivate fres...

 Producing new plants by grafting Grafting is the act of joining a part of a plant to a part of another plant of the same genus and growing it as a single plant. Here the plant attached to the soil is called the receiver and the foreign plant is called the supporter There are several methods of transplanting plants Plant breeding methods 1.Bud graft Plaster graft H graft T graft :-                 Upright T joint                 Inverted T joint 2.Shoot transplant Sprout wedge grafting Arch implant How the transplant is done In bud grafting methods, the cutting of the recipient plant is always used and the rootstock is brought as a bud and grafted to the recipient. After that, the grafting tape is done from the bottom of the recipient trunk up At seven to ten days post-implantation, the graft volume should be removed and checked If the graft remains green, the graft is successful If the graft is su...

  Hydroponic cultivation Cultivation of crops using another planting medium instead of soil is called soilless cultivation or hydroponic cultivation. Examples of planting media Coir  sand Gravel Small pebbles Coco seat glass wool straw Stones It is very important to sterilize the planting media before hydroponic cultivation Supplying nutrients in hydroponic cultivation An aqueous nutrient medium is used It contains all macronutrients and micronutrients required for plant growth It is important to maintain the pH value of the medium between five and eight - six and five Examples of nutrient media:- Alan Cooper mix Albert Mixture

  How to make fish manure as a liquid fertilizer By applying fish extract to plants:- Supplying good nutrients is very important to maintain good growth of a plant Fish extract can be described as a liquid fertilizer that is very easily available to a plant Now let's see how to make fish fertilizer, a liquid fertilizer that you can easily make at home Materials needed:- This requires a pot or small barrel with a sealable lid to prepare the liquid fertilizer Discarded fish or fish waste - 1kg brown sugar - 1kg Water as needed to dilute Let's see how to make this now:- Here, first add five hundred grams of sugar to one kilo of fish with water and put it in the pot and close it, after that for ten days add another five hundred grams of sugar and close it. After about fourteen days this can be given to the plant and used Also mix some lime here to control the pH

 Control And Maintenance of Nurseries Nursery control for upland crops A nursery is a temporary stand where planting materials are planted and cared for until they become suitable for planting in the field, providing a favorable environment for germination and plant growth. Importance of nursery management The environment suitable for plants can be controlled Stronger and healthier plants can produce more growth. Plants can be produced from small seeds that are difficult to plant directly in the field. The required number of plants can be obtained with less seed quantity than that required in simultaneous planting of seeds in the field. Care is easy Only healthy plants can be selected and planted in the field. Uniformity can be achieved in the field by selecting plants with similar growth. Availability of recipient plants for grafting. Nursery setting There are four steps to setting up a nursery Choosing a suitable location Nursery mix and nursery setting Nursery sterilization Inst...

 Making organic green manure. Today we are going to tell you how to make liquid green manure in a very simple way. This liquid fertilizer can be prepared in a very simple way using plant leaves. Liquid fertilizer is an organic fertilizer that increases the growth and yield of the plant. How to prepare liquid fertilizer A container is always needed to prepare liquid fertilizer. Crush 30 kg of Gliricidia or wild sunflower leaves and put them in a tub. Add water just to dissolve it. Then leave it for 2 days to settle well .Then strain Dilute the filtered solution 1:3 with water and spray on the plants. You will see good growth of crops and increase in yield. In this way you can easily prepare liquid fertilizers at home. If you have any other agricultural problems, please write your problem below in the comment section.

How to make quality compost in six weeks Raw leaf parts 1 Dry leaf parts 1 1 parts of dry animal waste   How to make compost First choose a suitable station Take the compost pile as 1 meter wide and 1.5 meters high. The length can be maintained as needed. Spread a layer of dry leaves on the bottom of the cleaned ground On top of that, alternately pile a layer of animal waste, then a layer of greens up to a height of 1.5 meters. Finally cover the pile completely with black polythene. Always use water when laying floors. After two weeks, turn the pile over, stir and cover again. Fertilize every two weeks. After six weeks, plants can be applied. Quality compost :-  brown or black Fragile There is no offensive prose. Composite Factors affecting the process:- 20% or 30% carbon/nitrogen Moisture and air 50% - 60% Temperature (60-70 degrees Celsius)

Making plants from branches By using this method you can create a new plant in a very simple way. This method is a very effective way to get a new plant from a plant. This method is widely used to make plants from plants like lemons and oranges. The plant selected for this branching should be a plant with high fruit, very strong and resistant to diseases and pests. First select a healthy branch of the plant. It is better to use somewhat mature branches here. Now make a small incision in a suitable place on the branch of your choice and attach a small pebble to it  After that, cover the cut of the branch with moist soil. After that, apply a polythene cover around it. After about a month, you will see it taking root. Now your new plant is ready to plant. Remove the polythene cover and cut the branch below the root and separate it from the plant. After that, plant in the cultivation bed and apply water.

How to make a successful plant from cuttings is simple  Today in this article I am going to tell you about how to make plants from cuttings. So this method is very easy. To do this, you first have to choose a plant that grows by cuttings. After that, you need scissors that can cut well, and a pot filled with soil for planting. Now you have to do a very simple thing, choose a part of the plant where you can make plants from the cuttings you have picked. Now what you have to do is cut and remove the selected part correctly.. When cutting this part of the branch, the cut should have an inclination of 45 degrees. Now what you have to do is to plant the cut part in the garden. There are several tasks to be done when planting this. In the cut part of the cutting, we can apply a stimulant or a hormone to get the roots quickly. For this, the hormone known as ruton is widely used. Now apply this hormone well on the cut part, after that, put it in the soil of the cultivation area to the dept...